Product introduction:
Polishing bottom, cover & tank body. Polishing equipment integral cover, equipped with dust collecting equipment. Customized designed CNC polishing equipment for Tianjin Liraval, a Swedish-owned company. Polishing up to 8K mirror effect, uniform quality and texture of each batch. Roughness Ra≤0.1 μm.
Siemens 828D CNC system, with one IP65 explosion-proof servo motor, and the other six motors use non-explosion-proof IP54 servo motor and dust cover.
Product parameters:
Equipment's dimension: 2300mm x 2600mm x 2700mm
Workpiece requirements:
Upper and lower head requirements: The surface of the raw material is 2B, and a polishing is completed in 18-25 minutes.
In addition to the wall of the mouth and from the wall of the mouth is 20mm -35mm range, pulling the mouth end of the three surfaces, requires 8K mirror effect, each batch consistent quality and texture, roughness Ra≤0.1 μm.
Outside the can body: The surface of the raw material is 2B, and a polishing is completed in 30 minutes. In addition to the wall of the mouth and 20mm from the wall of the mouth, 8K mirror effect is required. The quality and texture of each batch are consistent, and the roughness Ra≤0.1 μm.