Stainless steel polishing roughness and removal rate

Stainless steel polishing roughness and removal rate

The stainless steel polishing process is to obtain a glossy mirror-like surface finish. Most of the parts that are repeatedly polished with a polishing wheel have extremely slight unevenness on the surface of the part, which is commonly used for the m...

View More
Stainless steel tank polishing, stainless steel cone polishing level comparison table

Stainless steel tank polishing, stainless steel cone polishing level comparison table

Surface finish 15 = Ra 0.006 (mirror); Surface finish 14 = Ra 0.012 (fog mirror); Surface finish 13 grade = Ra 0.025 (mirror glossy surface); Surface finish 12 = Ra 0.050 (bright finish); Surface finish 11 grade = Ra 0.1 (dark gloss surface);Surface...

View More
Common problems and solutions in the grinding process of cylinder with abrasive belt

Common problems and solutions in the grinding process of cylinder with abrasive belt

Abrasive belt deviation:1.The adjustment mechanism is not properly adjusted, the belt moves slowly in one direction and moves faster to the other side.The left and right oscillations of the belt should be balanced, and the belt centering device is use...

View More
Both Stainless steel round tube polishing and electrolytic polishing can reach Ra≤0.4?

Both Stainless steel round tube polishing and electrolytic polishing can reach Ra≤0.4?

Mechanical polishing, to achieve 0.4 is no problem, mainly depends on the number of sandpaper, generally divided into several steps: rough polishing, fine polishing, electrolytic polishing is actually a physical effect, is the process of pickling....

View More
Mechanical polishing, electrolytic polishing, chemical polishing - Introduction to several classifica

Mechanical polishing, electrolytic polishing, chemical polishing - Introduction to several classifica

Mechanical polishing is a polishing method that removes the polished convex portion by plastic deformation on the surface of the material to obtain a smooth surface. Generally, oil stone strips, wool wheels, sandpaper, etc. are used, and manual operat...

View More